Assembly Instructions
CAUTION:
While it is possible for one person to
assemble this grill, obtain assistance from another
person when handling some of the larger, heavier
pieces
1. Open lid of shipping carton and remove top
sheet of cardboard. Lay cardboard sheet on floor
and use as a work surface to protect floor and grill
parts from scratches.
2. Remove packing materials from shipping carton.
3. You may slice the carton front corners with a
utility knife to lay open the carton front panel. This
will allow you to raise the grill head lid and remove
the components packed inside the head
4. Use the parts list to check that all parts have
been included.
5. Inspect the grill for damage as you assemble it.
Do not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts
when you unpack the shipping box, or you have
questions during the assembly process, call:
For Assembly Questions, call 1-800-913-8999
8am – 5pm PST, Monday through Friday.
Assembling Grill Cart
1. Attach the wheels to left side panel using (2) ¼”
hex nuts with (2) ¼” flat washers. (Fig.1)
2. Attach the locking casters to the bottom of the
right side panel legs. Then tighten caster screw
securely using hex nut wrench provided in parts
pack. (Fig.2)
3. Assemble cart leg with bottom panel using (8)
1/4x7/5" Phillips head screw and (8) ¼” lock
washers.(Fig.3)
4. Attach the back panel to the cart legs using (4)
1/4x3/5" Phillips head screws and (4) ¼” lock
washers. (Fig.4)
Figure 1
Figure 2
Figure 3
Figure 4
8