Installing Grill Head
1.
Remove grill head unit from carton, then place onto
cart from above as shown on diagram (below).
Caution!!
Head unit is heavy. To avoid injury, we strongly
recommend 2 or more persons for this step.
3. Align screw holes located on the outside of the grill.
(Fig.10)
3.
Attach the grill head to right side panel using (4) ¼ x 3/5”
screws with (4) ¼” washers. (Fig.11)
4. Secure using (2) 5/32 x 2/5" Phillips head screw and (2)
5/32” nuts with (2) 5/32” lock washers attach the side
burner heat shield and firebox heat shield together.
Insert
(4) 5/32 x 2/5”Phillips head screw
with (4) 5/32” lock
washers attach these Shield on the leg and firebox bottom.
See (Fig 12.)
Figure 10
Figure 11
Figure 12
10
5/32x1.38”