GRILL LIGHTING INSTRUCTIONS
WARNING: IMPORTANT!
BEFORE LIGHTING…
Inspect the gas supply piping or hose prior to turning the
gas “ON”. If there is evidence of cuts, wear, or abrasion,
it must be replaced prior to use. Do not use the grill if the
odor of gas is present. The pressure regulator and hose
assembly supplied with the unit must be used. Never
substitute regulators for those supplied with the grill. If a
replacement is necessary, contact the factory for proper
replacement.
Screw the regulator (type QCC1) onto the tank. Leak
checks the hose and regulator connections with a soap
and water solution before operating the grill (see
assembly instruction).
TO LIGHT THE GRILL BURNER:
Turn all knobs to “OFF” then turn on the gas supply.
Always keep your face and body as far from the grill as
possible when lighting.
Open Tm(g)Tj10.02 0 0 110.02 79.32039 426.24078l.0144H4l Tm(n)Tj10.02 0 0 10.24043 Tm(en)T lid10.02 0 0 10.02 109.561895426.24043 Tm(Op), pj10.02 0 0 10.02 120.10592 460.24043 Tm(Op)sh aj10.02 0 0 10.02 143.226555 40.24043 Tm(Op)d
Op
