Zigbee DALI TW Converter with power supply
The NEXENTRO Config App displays all available Zigbee devices to which the actuator
can be connected.
￭
Further actions in the NEXENTRO Config App follow.
Using the actuator without an existing Zigbee network, the actuator forms its own network
￭
Select the Create Network function.
The NEXENTRO Config App displays all available Zigbee devices to which the actuator
can be connected.
￭
Further actions in the NEXENTRO Config App follow.
Connecting the actuator to devices via Touchlink
To connect the actuator to another Zigbee device via Touchlink, e.g. a hand-held transmitter or
gateway, Touchlink must be first activated on the actuator.
Requirement: The distance between the devices to be connected is 10 to 50 cm.
￭
Select the Touchlink function.
The actuator is ready to be connected to a device via Touchlink.
￭
Trigger Touchlink on the other Zigbee device.
The actuator is connected to the device.
￭
Further optional actions in the NEXENTRO Config App follow.
8
Commissioning without app
A simplified commissioning can also be carried out without the app.
Prerequisite: The actuator is in the default setting or the assignment to a Zigbee network has
been deleted.
￭
Open the network of the gateway, see gateway app.
￭
Switch on mains voltage.
The actuator searches for the gateway's Zigbee network for 1 minute.
The light flashes two times, the actuator has found the network and joined it. The actuator
is displayed in the app of the gateway.
￭
If the actuator is operated without a gateway, connect the actuator to a transmitter via
Touchlink within 5 minutes after switching on the mains voltage.
A more detailed configuration can only be carried out with the NEXENTRO Config App.
DANGER!
Mortal danger of electric shock.
In contrast to commissioning via app, the following work must be carried out under
mains voltage and therefore may only be carried out by an electrician!
Only use insulated tools for the work! Cover up live parts in the working environ-
ment.
Setting the minimum brightness
￭
Press the Prog. button for longer than 4 seconds and release it.
The LED lights up green.
￭
Press and hold the Prog. button for longer than 1 second.
The light switches to the lowest brightness and slowly becomes brighter. The LED flashes
green.
￭
Once the desired brightness is reached, release the button Prog..
5 / 7
82403700
02.09.2020
