Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
38
Chapter 5: System Setup
VTC 1010 User Manual
Installing the First WWAN Module
1. The Mini PCI Express slot (CN10) shown below is used to install a
WWAN communication module such as GPRS, UMTS or HSDPA module.
This WWAN module is paired with SIM socket 1.
2. Insert the module into the Mini PCI Express slot at a 45 degrees angle
until the gold-plated connector on the edge of the module completely
disappears inside the slot. Then fasten screws into the mounting holes
to secure the module.
