Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
39
PEAK 888 User Manual
Chapter 3: BIOS Setup
SATA Configuration
This section is used to configure the SATA drives.
SATA Controller(s)
Enables or disables the SATA controller.
Advanced
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable SATA Device.
SATA Controller(s)
SATA Mode Selection
Software Feature Mask Configuration
Serial ATA Port 0
Software Preserve
Port 0
Serial ATA Port 1
Software Preserve
Port 1
Serial ATA Port 2
Software Preserve
Port 2
Serial ATA Port 3
Software Preserve
Port 3
Serial ATA Port 4
Software Preserve
Port 4
Serial ATA Port 5
Software Preserve
Port 5
[Enabled]
[AHCI]
Empty
Unknown
[Enabled]
Empty
Unknown
[Enabled]
Empty
Unknown
[Enabled]
Empty
Unknown
[Enabled]
Empty
Unknown
[Enabled]
Empty
Unknown
[Enabled]
SATA Mode Selection
Configures the SATA mode.
RAID This option allows you to create RAID or Intel Matrix Storage
configuration on Serial ATA devices
AHCI
This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
Port 0 to Port 5
Enables or disables SATA port 0 to port 5.
