Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
36
PEAK 888 User Manual
Chapter 3: BIOS Setup
Parallel Port Configuration
This section is used to configure the parallel port.
Parallel Port
Enables or disables the parallel port.
Change Settings
Selects an optimal setting for the Super IO device.
Device Mode
Configures the operating mode of the parallel port. The options are Standard
Parallel Port Mode, EPP Mode, ECP Mode, EPP Mode & ECP Mode.
Advanced
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Parallel Port
(LPT/LPTE)
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=378h; IRQ=5; DMA=3;
[Auto]
[EPP mode & ECP mode]
