manualshive.com logo in svg

Nexcom PEAK 735 Series, User Manual

Share
Download
Nexcom PEAK 735 Series User Manual Download Page 31

On-Chip Serial ATA Setting

On-Chip Serial ATA

The setting is used to specify te SATA controller.

Settings:

Disable,        Auto,         Combined Mode,          Enhanced Mode,           SATA only

If <Combined Mode> is selected, PATA and SATA will be combined.

If <Enhanced Mode> is selected, PATA and SATA will both be enabled.

If <Auto> is selected, PATA and SATA will be arranged by BIOS, and you will be able to

see the IDE Device Status listed in the Standard CMOS Features.

Serial ATA Port O/I Mode

Select a compatible mode for Port 1 and Port 2 from the Award Setting to the Chipset

Setting:

         Primary Master          Compatible Mode w/Serial ATA Port 1 set to Primary Master

         Primary Slave             Primary Slave

         Secondary Master      Secondary Master

         Secondary Slave        Secondary Slave

         Primary Master           Compatible Mode w/only serial ATA Enabled and Port 1 set

                                               to Primary Master

         Secondary Master       Secondary Master

         SATA 1 Master            Enhance mode w/Port 1 set to Native Mode Master

         SATA2 Master             Enhance mode w/Port2 set to Native Mode Master

30

Summary of Contents for PEAK 735 Series








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands