Nexcom PEAK 735 Series, User Manual

Page: 50 / 71

49
Parallel Port Mode
The choices available include SPP, EPP, ECP and ECP+EPP.
ECP Mode Use DMA
When the on-board parallel port is set to ECP mode, the parallel port can use DMAS
or DMA 1. After you have made your selections in the Integrated Peripherals setup,
press the <ESC> key to go back to the main program screen.
CSA LAN (Giga-LAN)
Select Enabled for CSA LAN function.
4.9 Power Management Setup
Figure 4-7 : BIOS -- Power Management Setup
Auto PWR-Failure Resume
This setting specifies whether your system reboots after a power failure.
There are three selections:
Off: The system will remain off when power comes back after a power failure.
On: The system will switch on when power comes back after a power failure.
Former-Sts: The system will return to the last state before the power failure when power
returns.