Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
45
OPPC 1540HT-J1900/1940HT-J1900 User Manual
Chapter 3: System Setup
Installing a SO-DIMM Memory Module
1. With the chassis cover removed, insert the module into the SO-DIMM
socket at an approximately 30 degrees angle. Apply firm even pressure
to each end of the module until it slips into the socket. The gold-plated
connector on the edge of the module will almost completely disappear
inside the socket.
2. Push the module down until the clips on both sides of the socket lock
into position. You will hear a distinctive “click” sound, indicating the
module is correctly locked into position.
