background image

5

Chapter 2: Product Introduction

Copyright © 2013 NEXCOM International Co., Ltd. All rights reserved

nROK 500 User Manual

Hardware Specifications

CPU

• 

Intel

®

 Atom™ D525 Dual Core 1.8GHz 

Main Chipset

• 

Intel

®

 ICH-8M

Memory

• 

2GB DDR2 667MHz SODIMM (up to 2GB)

Storage

• 

CF Card socket: External accessible type, screwed with CF card cover

• 

1x 2.5” SSD drive bay

Expansion

• 

1x Mini-PCIe socket (for 3.5G module option)

I/O Interface-Front

• 

1x VGA Output

 

- DB15 x 1, support analog monitor with pixel resolution up to 2048 x 

1536@75 Hz

• 

2x RS-232 COM Port

 

- DB9 x 2, support 115.2 Kbps baud rate

• 

2x USB Port

 

- 2x USB 2.0 ports, 500mA per port, covered with plastic cover to 

against the dust

• 

1x Mic-in & 1 x Speaker-out

 

- Audio controller: High definition audio controller, Realtek: ALC888-GR

 

- 1x Speaker-out, Dia. 3.5mm phone jack, covered with plastic cover to 

against the dust

 

- 1x Mic-in, Dia. 3.5mm phone jack, covered with plastic cover to 

against the dust

• 

1x 10/ 100 M12 LAN Port

 

- LAN Controller: Intel

®

 WG82574L LAN controller x 1

 

- Support wake on LAN and boot from LAN function

• 

Wireless communication

 

- 1x External accessible SIM card socket

 

- 1x Mic-in for wireless communication use

 

- 1x Speaker-out for wireless communication use

 

- 2x Antenna holes (for 3G/ 3.5G mobile wireless module)

• 

LEDs

 

- 1x LED for power status

 

- 1x LED for HDD status

 

- 1x LED for 10/ 100 LAN link

 

- 1x LED for 10/ 100 LAN active

• 

DC Input

 

- Nominal Voltage: 24V (Range: 16.8V ~ 30V)

 

- Ignition signal input (24V, nominal; 0~10.5V = off, rest = on)

 

- 500V Isolated design on DC Input

 

- 1x External fuse

Operating System

• 

Windows Embedded Standard 2009

• 

Windows Embedded Standard 7

System Dimension

• 

264mm (W) x 142mm (D) x 65.5mm (H)

Summary of Contents for nROK 500











































Reviews: