Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
81
NISE 3900 Series User Manual
Chapter 4: BIOS Setup
PCH-IO Configuration
This section is used to configure PCH-IO configuration.
PCH LAN Controller
Enables or disables onboard NIC.
State After G3
Configures the power state when power is re-applied after a power failure
(G3 state).
LAN2 and LAN3
Enables or disables LAN2 and LAN2 controllers.
Chipset
Version 2.20.1271. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Device Options Settings
PCH-IO Configuration
SATA And RST Configuration
Security Configuration
HD Audio Configuration
PCH LAN Controller
State After G3
LAN2
LAN3
[Enabled]
[S0 State]
[Enabled]
[Enabled]
►
►
►
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.20.1271. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable the Root Port
PEG Port Configuration
PEG 0:1:0
Enable Root Port
Max Link Speed
PEG 0:1:1
Enable Root Port
Max Link Speed
PEG 0:1:2
Enable Root Port
Max Link Speed
Not Present
[Auto]
[Auto]
Not Present
[Enabled]
[Auto]
Not Present
[Enabled]
[Auto]
Enable Root Port
Enables or disables the root port.
Max Link Speed
Select the maximum link speed of the PEG device.
PEG Port Configuration
