Nexcom NIO200 HAG, User Manual

Page: 7 / 120

NIO200 HAG User Guide Page 7 of 120
2 Product Overview
2.1 About the NIO200 HAG Gateway
The NIO200HAG Gateway is industrial wireless-enabled computer designed to enable customers
to deliver market leading wireless solutions. The WirelessHART Monitoring Control System is a
web application that runs on NIO200 HAG Gateway enables users to remotely view and configure
their WirelessHART network. The MCS runs on the NIO200HAG and gives users with proper rights
control over the network, including the means to monitor the topology, set up data transmissions,
and control the processes that take place in the network.
2.2 Logical Interfaces
Interface Description
Serial Port The serial port is used as a kernel console and emergency backup.
TCP The NIO200HAG Gateway accepts the following TCP connections.

The NIO200HAG Gateway has an http server listening on port 80.

The NIO200HAG Gateway has an http server listening on port 8080.

The NIO200HAG Gateway has an https server listening on port 443.

The MODBUS TCP server is listening on TCP port 502.
UDP The NIO200HAG Gateway utilizes the NTP protocol to synchronize time with
Internet time servers. The UDP port 123 must be open in both directions to allow
time synchronization.
NOTE:
Not all interfaces are guaranteed to be up in all cases. Some might be disabled for specific
applications.