background image

Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.

59

NIFE 105 Series User Manual 

Chapter 4: BIOS Setup

Boot Option Priorities

Adjust the boot sequence of the system. Boot Option #1 is the first boot 
device that the system will boot from, next will be #2 and so forth.

Fast Boot

When enabled, the BIOS will shorten or skip some check items during POST.
This will decrease the time needed to boot the system.

Save & Exit

Save Changes and Reset 

To save the changes and reset, select this field then press <Enter>. A dialog 

box will appear. Confirm by selecting Yes. You can also press <F4> to save 

and exit Setup.

Discard Changes and Reset 

To exit the Setup utility and reset without saving the changes, select this 

field then press <Enter>. You may be prompted to confirm again before 

exiting. You can also press <ESC> to exit without saving the changes.

Restore Defaults

To restore the BIOS to default settings, select this field then press <Enter>. A 

dialog box will appear. Confirm by selecting Yes.

Save & Exit

Advanced

Chipset

Security

Boot

Main

Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Reset the system after saving 
the changes.

Save Options

Save Changes and Reset

Discard Changes and Reset

Default Options

Restore Defaults

Summary of Contents for NIFE 105 Series














































































Reviews: