Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
54
NIFE 105 Series User Manual
Chapter 4: BIOS Setup
USB Mass Storage Driver
Enables or disables USB mass storage driver support.
USB Transfer Time-out
The time-out value for control, bulk, and Interrupt transfers.
Device Reset Time-out
Selects the USB mass storage device’s start unit command timeout.
Device Power-up Delay
Maximum time the value will take before it properly reports itself to the Host
Controller. “Auto” uses default value: for a Root port it is 100 ms, for a Hub
port the delay is taken from Hub descriptor.
Chipset
This section gives you functions to configure the system based on the
specific features of the chipset. The chipset manages bus speeds and access
to system memory resources.
South Bridge
Enters the South Bridge submenu.
South Cluster Configuration
Enters the South Cluster Configuration submenu.
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
South Bridge Parameters
South Bridge
South Cluster Configuration
►
►
