Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
36
NEX 812 User Manual
Chapter 3: BIOS Setup
Max TOLUD
Configures the maximum value of TOLUD.
PCIEX16_1 Gen Speed
Configures the maximum link speed of the PEG device.
Primary Display
Select which IGFX/PEG/PCI graphics device should be the primary display or
select SG for Switchable Gfx.
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary
display.
System Agent (SA) Configuration
Graphics Configuration
Chipset
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Maximum Value of TOLUD.
Dynamic assignment would
adjust TOLUD automatically
based on largest MMIO length
of installed graphic controller
System Agent (SA) Configuration
Memory Configuration
Memory Frequency
Total Memory
Max TOLUD
PCIEX16_1 Gen Speed
Graphics Configuration
2133 MHz
4096 MB
[Dynamic]
[Auto]
Chipset
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG
for Switchable Gfx.
Graphics Configuration
Primary Display
Primary IGFX Boot Display
[Auto]
[VBIOS Default]
