manualshive.com logo in svg

Nexcom NEX 6620A, User Manual

Share
Download
Nexcom NEX 6620A User Manual Download Page 45

NEX 6620A User's Guide 

 

Rev.    B0 0301 

BIOS Setup

 

4-24

Press <Enter> to enter the sub-menu, and you will see a sub-menu. 

IRQ Assigned To 

This item allows you to determine the IRQ assigned to PCI Device or Reserved. 

The Choice: PCI Device, Reserved. 

►

   Memory Resources 

Press <Enter> to enter the sub-menu, and you will see a sub-menu. 

Reserved Memory Base 

Some add-in cards ask for a specific address space in the system memory. This field specifies the 

memory base (start address) of the reserved memory space. 

The Choice: N/A, C800, CC00, D000, D400, D800, DC00. 

Reserved Memory Length

 

This item is available only when the Used MEM Base Addr has been assigned a base address. It 

specifies the memory size for the add-in card used. 

The Choice: 8K, 16K, 32K, 64K 

PCI/VGA Palette Snoop 

Leave this field at Disabled. 

The Choice: Enabled, Disabled. 

Assign IRQ For VGA/USB 

Enable/Disable to assign a IRQ for VGA/USB. 

The Choice: Enabled, Disabled. 

PCI Latency Timer(CLK) 

This item is used to specify assign PCI Latency Timer value. 

The Choice: 0-255. 

INT Pin 1~4 Assignment 

This item is used to specify assign PCI device Interrupt line use IRQ number.    BIOS will show that what 

PCI device will be assign in Item Help. 

The Choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15. 

Summary of Contents for NEX 6620A






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands