Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
49
NDiS V1000 User Manual
Chapter 4: BIOS Setup
Security
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Administrator Password
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length
20
Administrator Password
User Password
HDD Security Configuration:
P0:M.2 (S42) 3TE7
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
HDD Security Configuration
Chipset
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set HDD User Password.
*** Advisable to Power Cycle
System after Setting Hard Disk
Passwords ***.
Discard or Save changes option
in setup does not have any
impact on HDD when password is
set or removed. If the ‘Set
HDD User Password’ option is
hidden, do power cycle to
enable the option again
HDD Password Description :
Allows Access to Set, Modify and Clear
Hard Disk User Password
User Password is mandatory to Enable HDD Security.
If the ‘Set User Password’ option is hidden,
do power cycle to enable the option again.
HDD PASSWORD CONFIGURATION:
Security Supported :
Security Enabled :
Security Locked :
Security Frozen :
HDD User Pwd Status :
HDD Master Pwd Status :
Set User Password
Yes
No
No
No
NOT INSTALLED
INSTALLED
Set User Password
Select this to configure the HDD user security password.
