Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
33
NDiS V1000 User Manual
Chapter 4: BIOS Setup
ACPI Settings
This section is used to configure ACPI settings.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables BIOS ACPI
Auto Configuration.
ACPI Settings
Enable ACPI Auto Configuration
[Disabled]
Enable Hibernation
[Enabled]
ACPI Sleep State
[S3 (Suspend to RAM)]
Lock Legacy Resources
[Disabled]
Enable ACPI Auto Configuration
Enables or Disables BIOS ACPI Auto Configuration.
Enable Hibernation
Enables or disables system ability to hibernate (OS/S4 Sleep State). This
option may not be effective with some operating systems.
ACPI Sleep State
Select the highest ACPI sleep state the system will enter when the suspend
button is pressed. The options are Suspend Disabled and S3 (Suspend to RAM).
Lock Legacy Resources
Enables or disables lock of legacy resources
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Configuration
SATA Port 1 (M.2 M-KEY)
SATA Port 2
M.2 (S42) 3TE7 (60.0GB)
Not Present
SATA Configuration
This section displays information on the connected SATA devices.
SATA Port 1 (M.2 M-KEY) and SATA Port 2
Displays what type of device is connected to SATA port 1 and port 2.
