Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
4
NDiS 542 User Manual
Chapter 1: Product Introduction
BIOS
•
Award system BIOS
•
Plug and Play supported
•
Advanced Power Management and Advanced Configuration & Power
Interface
•
8M bit flash ROM
System Management
•
Monitoring
- Derived from Super IO to support system monitor.
- Monitors 4 voltages, 3 temperatures and 3 fan speeds
- 4 voltages (+3.3V, +5V, +12V, Vcore)
- 3 temperatures (CPU and two external temperature sensors)
- 2 fan speeds (CPU and system fans)
•
Watchdog
- Watchdog timeout is programmable by software from 1 second to 255
seconds and from 1 minute to 255 minutes
- Tolerance: 15% under room temperature 25°C
NDiS 542 System
Physical Characteristics
•
Dimensions (W x D x H)
- 365mm x 426.2mm x 44mm (1U Height)
•
Color
- Black
•
Mounting
- Wall mount bracket
•
Cooling system
- Main chip’s heat sink and 2 high speed system fans (RPM: 9200).
External I/O
•
Front I/O
- Two LED for Power-on and Storage
- One power-on LED (green)
- One HDD LED (yellow)
•
Rear I/O
- ATX Power-on switch
- Four DVI-I connectors
- Two dual-stack phone-jacks for line-out; total of 4 independent line-
out connectors
- Two RJ45 port with LEDs for 10/100/1000Mbps Ethernet
- Two dual-stack USB connectors; total of 4 USB ports
- One dual-stack DB9 connector, total of two RS-232 ports
- Reserved for optional antenna of WiFi
- Reserved for optional antenna of TV
- One 2x6 pin Terminal port for Tx/Rx of 4x RS232
Storage
•
One 3.5” SATA HDD bay
Environment
•
Operating temperature: 0~40°C
•
Storage temperature: -20°C~85°C
•
Relative humidity (non-condensing): 90%
