Nexcom NCr-661-VHA Page 58 User Manual Download

Page: 58 / 77

NCr-661-VHA and NCr-662-VHA User Manual

Chapter 2: Camera Configuration

Reset to Factory Default

Click this button to restore all the camera’s setting back to factory default,
including IP address (default is 192.168.1.168).

Download Log File

Records all the status information of the camera in list format when the
camera is connecting to the PC. Downloads the log file to the computer as
a text file.

Backup

Download Now

Downloads the current camera settings to a backup file.

Restore

Update and Restore

Click on the

Browse

button and locate the backup file, once the file is

selected, press the

Update and Restore

button to restore camera settings.

Video System

Options to switch between NTSC or PAL video system. The camera will
restart and reset to default after switching the video system.

Maintenance Cont.

Summary of Contents for NCr-661-VHA














































































Search results

Summary of Contents for NCr-661-VHA

Reviews:

Related manuals for NCr-661-VHA

Brands by name

Popular brands

Nexcom NCr-661-VHA, User Manual

Search results

Summary of Contents for NCr-661-VHA

Reviews:

Related manuals for NCr-661-VHA

Brands by name

Popular brands