manualshive.com logo in svg

Nexcom NCr-661-VHA, User Manual, Page: 41 / 77

Share
Download
Nexcom NCr-661-VHA User Manual Download Page 41

32

NCr-661-VHA and NCr-662-VHA User Manual 

Chapter 2: Camera Configuration

Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.

Image - OSD

General Settings

Camera Name

Specifies a name for the device. The maximum length is 32 characters.

Background

Configures the background color of the text overlay, the options are 

Translucent

 (light grey) or 

Transparent

.  

Text Color

Configures the text colour as 

Black

, 

White

, 

Green

 or 

Yellow

.  

Text Overlay

There are 4 content positions (Top Left, Top Right, Bottom Left and Bottom 
Right) to display the camera name, current date/time and text overlay. 

Content

 

OFF:

 The default setting is OFF.

Date/Time:

 Displays the current date/time.

Camera Name:

 Displays the device name.

Camera Name + Date/Time:

 Displays the device name and date/time.

Custom Text:

 A customized text can be specified here. 

Save

Save button to apply the configurations, click on this button once all the 
settings are confirmed for the new changes to take effect.

Summary of Contents for NCr-661-VHA














































































Reviews:

No comments