Nexcom NCr-305-VHR User Manual Download Page 45

Page: 45 / 69

Chapter 2: Camera Configuration

NCr-305-VHR User Manual

Event Actions

This section configures what actions to perform when an event is triggered
from motion detection.

When Motion Detection Triggered

Save Stream to SD Card

Check this option to store the video stream onto the SD card. Select the
desired file format in the drop down menu, the options are

AVI

and

JPEG

Upload Stream to FTP Server

Check this option to upload the video stream to a FTP server. Select the
desired file format in the drop down menu, the options are

AVI

and

JPEG

For information on configuring the FTP server, please refer to

FTP

on page 28.

Send Email Notification

Check this option to send an email notifying the event, for more information
on configuring the email address, please refer to

SMTP

on page 29.

Alarm Output

Check this option to activate the device connected to alarm output when
motion detection is triggered.

When Alarm In Triggered

Save Stream to SD Card

Check this option to store the video stream onto the SD card. Select the
desired file format in the drop down menu, the options are

AVI

and

JPEG

Upload Stream to FTP Server

Check this option to upload the video stream to a FTP server. Select the
desired file format in the drop down menu, the options are

AVI

and

JPEG

For information on configuring the FTP server, please refer to

FTP

on page 28.

Summary of Contents for NCr-305-VHR






































































Search results

Summary of Contents for NCr-305-VHR

Reviews:

Related manuals for NCr-305-VHR

Brands by name

Popular brands

Nexcom NCr-305-VHR, User Manual

Search results

Summary of Contents for NCr-305-VHR

Reviews:

Related manuals for NCr-305-VHR

Brands by name

Popular brands