Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
MVS 5200/5210/MVS 5210-R Series & NANO 1190 NVR User Manual
8
Chapter 1: Main Console
6.1.1 Auto Setting
Click the “
Auto Setting
” button to automatically add
cameras to the system. Maximum number of cameras
supported depends on NVR’s model.
After clicking the button, the system will show the fuzzy
search filter dialog, you can filter the search by model name,
IP address or MAC address, or you can keep them empty to
search all cameras.
Auto setting can insert intranet’s cameras, even ones located
behind several switch hubs. Alternatively, you can directly
insert cameras on the NVR’s switch hub, then click the
“
Auto Setting
“ button to add them into the system.
Using the “
Auto Setting
“ function, you won’t need to key-
in any network IP or subnet mask parameters, you only need
to click “
Auto Setting
“ button to add IP cameras.