Nexcom 10J00010800X0 User Manual Download Page 67

Page: 67 / 70

NISE 108 User Manual

Chapter 4: BIOS Setup

Save & Exit

Advanced

Chipset

Security

Boot

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Reset the system after saving the
changes.

Save Options

Save Changes and Reset

Discard Changes and Reset

Default Options

Restore Defaults

Save & Exit

Save Changes and Reset

To save the changes and reset, select this field then press <Enter>. A dialog

box will appear. Confirm by selecting Yes.

discard Changes and Reset

To exit the Setup utility and reboot the system without saving the changes,

select this field then press <Enter>. You may be prompted to confirm again

before exiting.

Restore defaults

To restore the BIOS to default settings, select this field then press <Enter>.

A dialog box will appear. Confirm by selecting Yes.

Summary of Contents for 10J00010800X0






































































Search results

Summary of Contents for 10J00010800X0

Reviews:

Nexcom 10J00010800X0, User Manual, Page: 67 / 70

Search results

Summary of Contents for 10J00010800X0

Reviews: