Every 6 month
Lubrication as per schedule 2.6
Check all points as per monthly service
Check and replace brake pads, if required
Check chain for excess play or wear
yearly
Lubrication as per schedule 2.6
3. The battery
3.1 Installing and removing the battery
To remove the battery, unfasten the lock
that is located along the battery’s box.
Remove the battery by pulling it out.
When you put the battery back into
place, don't forget to fasten the lock..
3.2 Charging the battery
Never let a battery be charged unattended!
The battery’s autonomy is indicated with the 4 green LED lights located on top of the battery, and
also on the display unit located on the handlebars (see 1.3 indicator 8). Your battery must be
charged in an ambient temperature, on a non-flammable and dry surface, away from any sources
of heat, humidity or flammable materials. Also, it must not be covered.
Here are the steps to be followed when charging your battery:
Step
1
Turn the battery off. The LED lights will be off.
Step
2
Plug the charger (which is off) into the socket and then insert the charger’s
plug into the battery, which is also off.
Step
3
the charger’s LED indicators lit up in the following manner:
• The red LED lights will be on: the battery is being charged.
• The red LED light becomes green:
the battery is charged; you can unplug the charger.
(B)
.
