2.2 Adjusting the height of the seat
Unlock the lever (OPEN), adjust the seat height
to the desired position
without ever exceeding the
mark carved onto the seat’s tube
, lock the lever(LOCK).
The seat’s height must be set so that yourleg is stretched
out when the corresponding pedal is in the lower
position.
2.3 Propping the bike upon its stand
Your bike is equipped with a main stand. Always
prop up the bike on its stand on a flat and stable
ground surface.
2.4 Lights
The front light has an autonomous
power supply. It turned on and off by the switch
located on the top of the Light. The LED lights
have a lifespan Lasting several years. See your
dealer to Obtain replacements.
Draw attention
to the national legal requirements when the bicycle
is to be ridden on public roads.
2.5 Quick-release devices
Tighten the adjusting nut by hand and move the quick release lever to the closed position. You
should feel considerable resistance while moving the lever. If not, re-open and re-tighten the
lever, then move it to the closed position so it is in line with the frame