TROUBLE SHOOTING:
a.
No activation: check battery life or polarity/ or unsuccessful connection.
b.
Receiver stays ON continuously: ROMDT-810 may be suffering from false activation. Adjust the
position/angle of the detector to solve the problem.
** Note: After installation, please check ROMDT-810 is working properly in all switch settings with
compatible self programming receiver.
WARNING:
** ROMDT-810 working compatible receiver DOES NOT operate in common with other transmitter.
Otherwise, if the receiver (lamp) is switched ON already by another transmitter (for example: handy
transmitter LYCT-505), then when ROMDT-810 detects movement and sends “ON” signal to the same
receiver, this receiver (lamp) starts to dim.
** Do not use ROMDT-810 with dimmer.
** 2 x Fresh AAA (1.5V) battery installed in ROMDT-810 are important for providing stable current
voltage to ROMDT-810 thus enhancing detection and transmission capability. Also 2 fresh batteries can
help to keep each other’s battery life as long as it should be.
www.nexa.se
