B. Set up Delay-off Time Switch
(
5sec./1min./5min./10min
)
as option. (See FUNCTION OF SWITCHES)
C. Set up Lux. Setting Switch
(
H/M/L
)
as option. (See FUNCTION OF SWITCHES).
Note whether there is surrounding light that can influence the brightness and affect the Lux. setting
choice. For example, in the late evening, the lux. setting is ‘L’. However, if there is a lamp in
environments where ROMDT-810 would be able to detect, the user may change lux. setting to ‘M’ .
After each set up process, ROMDT-810 detects movements within the detection range in order to
switch on the light and upon delay off time switch off the light automatically.
Manual switch:
After the code is learnt, the Set/Del switch can also be set as a manual switch to manually switch the
light on/off. Adjust to “Set” to switch the light on, adjust to “Del” to switch the light off. Manually
adjust to “Del”, when ROMDT-810 detects movement, can still switch on connected light, and
automatically switches off the light at delay time end. However, if manually adjusted to “Set” to
switch light on, the light will not switch off automatically at delay time end. Another connected
transmitter must be used to switch the light off.
D. Code deletion:
Purpose of code deletion: the user does not want ROMDT-810 to work with a certain receiver.
In this case, the user should delete ROMDT-810 code from the limited memories of the self
programming receiver to release the memory to the next transmitter code setting.
1.
Place ROMDT-810 in ‘SET’ mode near to self programming receiver which it works with.
2.
Press learning button of the receiver, LED flashes continuously.
3.
Slide ROMDT-810 learn switch from ‘SET’ to ‘DEL’, ROMDT-810 sends code to receiver.
4.
Receiver connected lamp flashes twice to confirm the code deletion. Receiver LED stops flashing.
5.
ROMDT-810 and receiver are no longer connected.
TECHNICAL SPECIFICATION:
Delay-off Time: 5sec./1min./5min./10min
Learn Switch: in ‘DEL’ mode when ROMDT-810 ex-factory.
Brightness lux. setting: H/M/L
Frequency: 433.92 MHz
Waterproof: IP44
Transmitting distance with receiver: 20M closed area
Battery: 3V DC Alkaline battery AAA (1.5V) x 2 (Excluded in ROMDT-810 ex-factory)
Angle of detection:
vertical- max. 202 degrees
horizontal- max. 110 degrees without lens-cover ~ 20 degree with lens-cover uncut (ex-factory).
