3. Delay-off time design:
7 selections of delay-off time design (2h-3h-4h-5h-6h-7h-8h) and.
“0” is for non-setting delay-off time.
0: no delay-off time setting. LBST-604
“ON” at (under) certain set up brightness level
and works
“ON” function with receiver which connected lamp light ON when the
environment brightness (darkness) level under that set up level.
LBST-604 should not be influenced by light (for example lamp light or car light).
If
NOT
be influenced by light, LBST-604 will send
“OFF” signal to switch off receiver connected lamp when environment
brightness level higher than the set up level. And switch on receiver connected lamp again at the same set up brightness the
next day.
If LBST-604 is
influenced
by light
(its sensor senses brightness level is higher than the set up level), it will send
“OFF”
signal to switch off receiver connected lamp immediately even the actual brightness at that time is still dark (not higher than
the set up level). LBST-604 will be ON again at the same set up brightness the next day.
