1-Aileron extension cord installation
Using the thread (pre-installed at factory)
to pull the aileron and flap extension cord
into the wing half.
Using the adhesive tape to secure the one
end of the aileron and flap extension cord in place.
WING BOTTOM-VIEW
WING TOP-VIEW
WING BOTTOM-VIEW
X
Using the adhesive tape to secure
the one end of the aileron and flap
extension cord in place.
Extension cord
Thread
Thread
Adhesive tape
This model is highly pre-fabricated and can be built in
a very short time. However, the work which you have
to carry out is important and must be done carefully.
The model will only be strong and fly well if you
complete your tasks competently - so please work
slowly, accurately and check every joints, maybe
apply more glue to be safe.
SAFETY NOTES BEFORE ASSEMBLING
2-Aileron and flap servo installation
