A
B
B’
B=B’
FRONT-VIEW
Remove the engine mount and drill a 5mm hole through
the fire-wall at each of the four marks marked.
Using a pencil or felt tipped pen, mark the fire wall where the four
holes are to be drilled
Reposition the engine mounts on to the fire-wall.
Attach the four blind-nut to the fire-wall as show.
Secure them with four 4x25mm hex bolts.
Position the engine on to the engine mounts so the distance
from the prop hub to the fire wall is 127mm
Mark the engine mounting plate where the four holes are to be
drilled.
Note: Mark the mounting plate through the engine mounting flanges.
Reposition the engine on the engine mount beams, aligning it with
the holes. Secure the engine to the engine mount using four
3x25mm hex bolts.
Note: Apply Silicon sealer to
each of the 3x20mm hex bolt.
4mm blind-nut
5mm
3mm
...4
.................4
Blind-nut
3mm nut
.................4
...4
4x25mm hex bolt
3x20mm hex bolt
Attach the engine mount beams onto the fire-wall so the distance between
of two engine mount beams is “A”,and B=B’ as show.
Secure the engine mount beams onto the fire-wall with litter CA glue.
! Align the mark on both engine mount
beams with the mark on the firewall.
Remove the engine and drill a 3mm holes through the beam
at each of the four marks made above.
125~127mm
! Engine thrust on balk
head is already adjust
at factory
1.5
TOP-VIEW
P-51 Voodoo
14- Engine mount & Engine
Step 14:1
Step 14:2
Step 14:3
Step 14:5
