Looking after your appliance
Disconnect the oven from the power supply at the fuse-box by means of the switch used to connect the
appliance to the electrical mains
,
or unplug the appliance
.
Remove the glass cover of the lamp-holder by rotating anti-clockwise
.
Remove the lamp and replace with a lamp resistant to high temperatures
(300
℃
)
with the following characteristics:
temperatures (300
℃
)with the following characteristics:
Voltage: 220-240V
Wattage: 25W
Type: E 14
Replace the glass cover. Reconnect the appliance to the mains power supply.
Cleaning the oven door
/
How to remove the oven doors
For a more thorough clean, you can remove and disassemble the oven door. Proceed as follows:
Oven door remov
al
and assemble procedure:
-
Open the lever A completely on the left and right hinges
(fig.2)
.
- O
pen the door to the full extent
(fig.1)
Fig.1
Fig.2
Fig.3
Fig.4
2
0
-
Hold the door as shown in (fig.3).
- Gently close the door (fig.3) until left and right hinge levers A are hooked to part B of the door (fig.4).
- Withdraw the hinge hooks from their location following arrow C ( fig.4).
- Rest the door on a soft surface.
- To replace the door, repeat the above steps in reverse.
