Newworld NWG60B, Instruction Manual

Page: 19 / 30

Using your Built-in Gas Hob
Getting the most from your appliance
Using your Built-in Gas Hob
19
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Instructions for use (gas hob burners)
The symbols on the control knobs mean
the following:
No gas flow or ‘O ff ’
Maximum gas flow or ‘high’ flame and
lighting position
Minimum gas flow or ‘low’ flame
All operating positions must be set between the
maximum and minimum flow settings, and never
between the maximum setting and the closed
position.
Gas Burner Components
A Burner cap
B Burner Head
C Burner Bowl
D Thermocouple (where fitted)
E Electrode
Controls
These parts can be removed for cleaning
periodically. After cleaning, they must be well
dried and correctly replaced. It is important to
check that the burner bowl and cap have been
correctly positioned. Failure to do so can cause
serious problems.
ArtNo.316-0025 RGG77 hob control to high
Fig. .
ArtNo.316-0026 RGG77 hob control to low
Fig. .