Newworld NWG60B, Instruction Manual

Page: 17 / 30

Electrical Connection
Before making the connection, make sure that:
1) The safety circuit-breaker and the electrical system are able to with stand the load of the
appliance.
2) The power supply system has a ground connection in good working order in accordance with
the regulations in force.
3) The electrical socket is easily accessible with the appliance installed. In all cases, the power
supply lead must be positioned so that it does not reach a temperature 50oC above the
room temperature at any point.
4) If installed above a built-in oven, the cooktop cable must not touch the oven below (see Figure 15).
Figure 4
Installing your Built-in Gas Hob
Bringing it all together
Replacing the power supply lead
If the lead has to be replaced, only HO5RR-F or
HO5RN-F type cables suitable for the load and the
operating temperature must be used. In addition, the
yellow/green earth wire must be about 2 cm longer than
the live and neutral wires.
Figure 5
Installing your Built-in Gas Hob 17