Newworld LOMOND100DFCRM, Instruction Manual

Page: 30 / 37

2 9
Product support
Help is always at hand
1. If no electrical functions appear to work, check
the cooker isolation switch has not been turned
off also check the fuse in the switch and the
circuit breaker in you consumer unit
2. After replacing the fuse or resetting the circuit
breaker turn on individual parts of your cooker
one at a time to check function
3. DO NOT ATTEMPT TO REPAIR THIS
COOKER YOURSELF. CALL NEWWORLD
Product Support on 0333 305
2263 OR CONSULT A GAS SAFE
REGISTERED INSTALLER
Problem Possible Cause Solution
Only parts of the cooker
work it may be that the ovens
or the grill, do not work Links may be missing in
the rear connector box Refer to the Quick Start
Guide to check the correct
placement of the links
This must be done by a
qualified competent person
Nothing works (completely
dead) Power is turned off at
the isolation switch or
the consumer unit
Poor electrical connection
Ensure isolation switch is on
Check consumer unit has not
tripped out
Have the connections
checked by a qualified
electrician
The hob burners do not
operate correctly Check if the burner parts
are correctly assembled
(especially after cleaning). The gas supply pressure may
be too low/high.
For appliances working with
bottled LPG, the LPG cylinder
may be depleted.
Oven not heating up Oven temperature not set
correctly
Door is not properly
closed
Ensure that the correct
temperature has been
selected and the door is
properly closed
Troubleshooting