Glass parts
door panels
Use a mild cream cleaner - eg; “Cif”.
Rinse thoroughly and dry with a soft
cloth.
Important: The inner door glass panel(s)
can be removed for cleaning, but they
must be replaced the right way (so the
reflective side faces inwards) and also
pushed fully in to the stop position. To
remove the glass panel, open the door
wide, hold the edges of the glass and
slide out.
Painted, plastic and metal finish
parts
control knobs, door handle & door, fascia
panel
Only use a clean cloth wrung out in hot
soapy water.
Chrome plated parts
oven shelf, grill pan trivet
Do not use abrasives or polishes, use a
moist soap pad - eg; “Brillo”.
Note: These items may also be cleaned
in a dishwasher.
Warning !
Disconnect the cooker from the power
supply before proceeding with washing
and cleaning and wait until it cools
down.
• The cooker must be cleaned regular-
ly. When cleaning, avoid using any
coarsegrained abrasive powders,
wire sponges, aggressive chemicals
and sharp objects. The knobs and
the fascia panel should be cleaned
with a soft cleaning liquid on a soft
cloth.
• Clean the enamelled parts with a
soft cloth or sponge moistened in
lukewarm water with the addition of
a soft detergent avoiding too much
water. Remove heavy stains with
special kitchen cleaning agents.
• Baking tins and meat roasting pans
should be soaked in lukewarm water
with the addition of washing-up liq-
uid and carefully dried.
• Check to make sure that the oven
door seal is always kept clean.
Oven Cleaning
Caution:
Before cleaning you should
wait until the oven cools down.
It is the best to clean the bottom of the
oven after every use and not allow the
remains of food and spots of oil to
remain burned on.
17
CARE & CLEANING
