Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective
gloves during installation.
Moving the cooker
Please note that the weight of this
appliance is approximately
43kg
-
550mm models /
50kg
- 600mm
models (unpacked).
Take care if the appliance needs to be
lifted during installation - always use
an appropriate method of lifting.
Do not attempt to move the cooker by
pulling on the doors or handles. Open
the door and grasp the frame of the
cooker, taking care that the door does
not shut on your fingers.
Take care to avoid damage to soft or
uneven floor coverings when moving
the appliance. Some cushioned vinyl
floor coverings may not be designed
to withstand sliding appliances without
marking or damage.
Clearances & dimensions
Appliance dimensions
All sizes are nominal - some variation
is to be expected. The ‘depth’ of the
cooker, as given below, is to the front
of the door & excluding knobs & handles.
depth:
600mm
width:
55WLG = 550mm
60WLGm/ 60GDC = 600mm
height:
900 - 915mm
Clearances
No shelf or overhang or cooker hood
should be closer than a minimum of
650mm, but check with cooker hood
manufacturer’s recommendations.
The cooker must have a side
clearance above hob level of 90mm
up to a height of 400mm.
Check that there are no projections
in the rear wall which will prevent
the lid (where fitted) being raised to
the vertical position.
To avoid damage to surrounding units
a 10mm gap should be left between
the appliance and the units. If this is
not possible, a kit (part number 01
25552 00) may be ordered from
Customer Care which will protect the
units. to
base units. For models with
side opening doors, we recommend a
side clearance of 60mm between the
cooker and any side wall to allow the
door to be opened fully.
21
90
mm
400
mm
650
mm
400
mm
90
mm
Installation Instructions
