10
After using any hob, make sure that it is switched off.
Never touch any heating element,
even
after it i
s
turned off.
The element will still
hold heat for a certain time after use.
Some ceramic models may have
a
hot surface warning light.
Clean the hotplates with a wet cloth after using them.
I
f
it
is
getting
excessivel
y
dirty, you can clean it with water
and
detergent.
If you will not use the hotplates for a while,
apply a thin layer of machine oil on it
as this will help extend the lifespan
.
CORRECT
WRONG
pot bottom is round
WRONG
pot buttom is small
WRONG
pot buttom does not sit well
Figure 9
4.4 USING THE OVEN
''A'' symbol will start to flash after it is connected to the
electrical source. Press (+) and (-) keys at the same
time. It is also possible to adjust (increase or
decrease
)
the time by pressing these keys.
-
+
MODE
A
Figure 18
4.4.1 Using the Digital Programmer
The d
igital programmer only controls the main oven. Some products may
only
have
a
digital minute minder.
This
only
provides an
alarm function
,
it
does not
control any oven functions.
Adjustment of Day Hour
