NEWTON S
1
SYSTEM OPERATION MANUAL
1 Introduction
This manual describes the handling and operation of the Newton S remote controlled, stabilized, head
together with the Newton C1 controller.
1.1
OVERVIEW
Newton S is a fully electronically stabilized three-axis remote camera head with 360 degree free pan
made for broadcast and film production from wires, rails, crane, vehicles and other moving platforms.
The full system comprises Newton S, the Newton C1 controller connected via a wireless or wired link,
lens control dongles, mechanical mounting accessories and a power supply solution. In addition to this
the user supplies the moving platform, any passive stabilization required and the camera.
1.2
WARNINGS AND NOTICES
WARNING
Before connecting or turning on the Newton S remote head or Newton C1
controller, read this manual and any warnings provided carefully.
WARNING
Do not power or charge the Newton S remote head or Newton C1
controller with anything but external prower supplies delivered by and/or
approved by Newton Nordic for use with the respecitve product. Doing so
can permanently damage or destroy the product.
Newton S accepts external power between 12 and 28 Volt. Powering it
with a supply outside this range will permanently damage it.
WARNING
When using attached batteries to power the Newton S, make sure they are
fully charged before starting operations.
WARNING
Make sure the camera and any other equipment is properly mounted and
secured before turning on the Newton S.
DO NOT DISTRIBUTE
Copyright © 2019 Newton Nordic AB
