6
For more information visit us online www.newtonwaterproofing.co.uk
Example 2
- 2 x Manual Pumps - Pump Control Panel - No Inverter/Charger Control Panels
INSTALLATION
The Inverter/Charger units are mains powered and should be installed by persons who are electrically competent
by way of appropriate training to either fit a fused plug or wire directly to a fused spur. Knowledge of DC input
by battery and the connection of DC batteries leads to both the battery(s) and the Inverter/Charger is required.
The product must be installed in a dry and well-ventilated area, as close as possible to the batteries. There
should be a clear space of at least 100mm around the appliance for cooling.
Excessively high ambient temperature will result in the following:
• Reduced service life
• Reduced charging current
• Reduced peak capacity, or shutdown of the inverter
The unit must be installed in a vertical position. Never mount the appliance directly above the batteries.
JOHN
NEWTON
& COMPA NY LIMITED (EST. 1848)
CONTROL PANEL - PRO 2
WARNING
SHOC K HAZARD ISOLATE BOTH POWER SUPPLIES,
GRID MAINS AND BATTERY BAC K-UP POWER SUPPLY
BEFORE OPENING
YOUR COMPANY NAME &
LOGO ON PLATE FITTED
TO THIS RECESS
PUMP 1
RESET
& MUTE
PUMP 2
RESET
& MUTE
PUMP 1
PUMP 2
Dialer is mounted within
the control panel with
purchase code CP7
Newton Control Panel
MultiPlus 12/3000/120
pum
p one
pum
p two
Main Float
Alarm
Float
+
MultiPlus
12
charger
inverter
victron energy
B L U E P O W E R
A C transfer capacity: 1x 50 A + 1X30A Inverter 230V
battery charger
sinewave inverter
transfer switch
powerassist
parallel
connectable
three phase
connectable
mains on
bulk
absorption
float
Inverter on
overload
low battery
temperature
www.victronenergy.com
on
off
charge only
VOLT
3000 120
VA
AMP
Batt ery
B efore charging read the i nstructi ons. For i ndoor use onl y. Disconnect
the suppl y before maki ng or breaki ng the connections to the battery.
WARNING: E xplosive gases, prevent flames and sparl s, provi de
adequate venti l ati on duri ng chargi ng. Charge lead-acid or Li-lon batteries
onl y.
-
Pumps compatible with
MultiPlus 12/3000/120
CP750/NP750/SP750 Cutter
For Battery dimensions
please see drawings
prefixed Batt
DC Battery
Temp - & Temp +
AC1
input
Grid input
connect to
AC1
output
The Victron MultiPlus 12/3000/120
battery back up system. Installed in
conjunction with Newton's System 500
pumping systems.
The Victron system provides an
Inverter/Charger function ensuring
water can still be removed in the event
of a power outage.
Additional batteries can be added of
varying sizes and power to provide
longer protection.
For Newton system 500 pumping
Specification's please contact
Newton's technical team on
01732 360095 or enquire about using a
Newton specialist contractor.
In addition upgrades can be made to
offer extra peace of mind and further
reduce risk.
Newton Dialler - requires a BT
Telephone line.
Victron Battery monitor
Victron blue power panel
Newton System 500
Titan-Pro White Manual pumping
System used with Newton System
500 waterproofing.
Section
To access the details mentioned above,
relevant NBS Clauses, product data and
MSDS sheets, please use this hyperlink:
Drawing Support
Checked by
Designed by
Date
Scale
Notes
Ref
Drawn by
Original Ref
NOTE: This is a waterproofing detail. For the design of the structure, please use a professional designer. We strongly recommend that Newton waterproofing systems are installed by our NSBC registered contractors who will guarantee,
insure and accept liability for both the design and the installation of our systems Please refer to product data sheets before installation of our products. John Newton reserves the right to update drawings.
NEWTON
Waterproofing Systems
17 - 19 Sovereign Way, Tonbridge, TN9 1RH
Tel: 01732 360095 Fax: 01732 359033
www.newton-membranes.co.uk - [email protected]
(EST. 1848)
Not to scale
29/04/2014
V3 - 02
AJB
XXX
AJB
INSTALLATION
INSTALLATION
