In the
Decoding Preset
section, there is a
blank output box, if switching without video
output, the device will output the set color.
It can also be used for testing the output to
the mointor by choosing a different color.
To the right of the
Decoding
Preset
header, this button is for
setting parameters for a smooth
switch. For example, a video or slow
transmission can be set to have a
longer smooth time - Figure 28.
1.4.6
DECODING PARAMETER SETTINGS
Current Decoding Output
will display the information of the current decoding NDI source name, channel
name, resolution/refresh rate, audio parameters, source IP address, real time bit rate and frame rate.
NOTE: If the current decoding source is disconnected, a red warning notice
will be displayed on the upper-right corner, showing the device offline.
FIGURE 27
FIGURE 28
FIGURE 29