TIPS
•
Newtech products are produced from materials that are well suited to the laundry, however it is important that your laundry
has sufficient ventilation to avoid excessive moisture due to water sources.
•
High humidity will lead to permanent dampness and mould, resulting in deterioration of the materials.
•
Care must always be taken to dry any excessive moisture or water spillage.
CABINETS
•
To maintain the finish on your cabinetry use only a soft cloth and weak solution of non abrasive detergent.
•
To remove scratches, marks, etc. on two pack polyurethane, rub gently with car cutting compound, car polish or household
brass/silver cleaner.
•
Goods used in construction are water/moisture-resistant, but not water-proof
QUARTZ SLAB TOPS
•
Wipe Your Quartz benchtop with mild dish soap and a soft rag. Take a soft cloth or sponge and dip it in a warm water and
soap mix. Take the sponge and begin to gently but firmly wipe down the quartz tops. Wipe them down as often as
you need.
STAINLESS STEEL SINKS
•
Rinse sink with water after use and wipe dry with soft cloth.
•
For stubborn stains, we recommend a mild non-scratch cleaner such as a vinegar-based cleaner with a non-abrasive sponge,
then rinse well. Clean often to avoid limescale building up.
•
DO NOT use steel wool to clean the sink, this will scratch the surface.
•
AVOID strong bleaches, silver dip cleaners and aggressive chemicals such as denture cleanser and photo developing liquids.
If it occurs, rinse thoroughly and wipe it dry quickly.
•
AVOID leaving citrus fruit juice, salt, vinegar, mustard, pickles and mayonnaise on your surface for prolonged periods. These
foods can cause pitting and corrosion.
12
|
Laundry Collection by Newtech
www.newtech.co.nz
Care & Maintenance
