NTSecureGateway
8 / 14
User Manual
11648_0008_0012_UM-User_Manual
Revision: DV A1
NewTec GmbH · Buchenweg 3 · 89284 Pfaffenhofen a.d. Roth · Germany · Tel.: +49 7302 9611-0 · [email protected] · www.newtec.de
F9
05
Intended Use
This product is designed to be used in industrial applications.
It is intended to be mounted in an electrical cabinet.
It is intended to collect measurement data via the provided interfaces (Bluetooth Low Energy, CAN, RS485 or
digital IOs) and provide this information to higher level instances like PLCs, Industry PCs, or Cloud solutions.
It is not intended to be used to control other devices, especially devices that can harm humans
It is not intended to be used in safety critical applications
It is not intended to measure and / or transfer critical data that can lead to machine failures
It is only intended to be used in an environment that is not exceeding the conditions defined in the chapter
The use of the product by private consumers is excluded.
Buyer shall verify the suitability of the product for the intended application by own tests before using the
NTSecureGateway. Due to the large number of parameters and conditions under which this product can be
used, each organization and person using this product is obliged to test this product on their own responsibility
for suitability and usability with regard to the desired application.
Residual Risks
The device must only be used for its intended purpose and only if it is in perfect safety condition.
Malfunctions that could impair safety must be rectified immediately.
In case of improper or unintended use, the device may no longer be used and any warranty claim expires.
Non-permissible influences can be: strong mechanical stress (e.g. when the device has been dropped),
voltages, currents, humidity outside the specification.
When commissioning machines/systems for the first time, all safety functions must always be checked in
accordance with the applicable regulations and the specified test cycles for safety devices must be observed.
Designated Location of Operation
The device must only be used and operated in a safe electrical cabinets. In any case, the regulations and
provisions of the professional association and all provisions that apply at the respective operating site must
be observed.
NTSecureGateway
Industry PC /
Cloud
Power
Supply
Measurement
Devices
BLE
CAN
RS485
IO
WIFI
Ethernet
24V
Figure 1: Intended use
