manualshive.com logo in svg

Newtec NOP1840 PEP-Box, User Manual

Share
Download
Newtec NOP1840 PEP-Box User Manual Download Page 60

User Manual for NOP1840 PEP-Box Server 

 

NOP1840 

 

Newtec proprietary 

Version 1.0 

Confidentiality :

 

Unrestricted

 

Page 60 / 96 

 

Setting 

Description 

Maximum size of 

accounting files 

The maximum file size in bytes allowed for an accounting file. When the 

maximum file size is reached, the accounting file is shifted, i. e. the content 

of the accounting file is stored as "<accounting file name>.<timestamp>.dat" 

where timestamp is the UTC date and time when the file was shifted in the 

format "year-month-day-hour-minutes-seconds". A new accounting file is 

started at that time with the same name as the old accounting file. 

 

7.3 

Software Daemon 

The software Daemon is used to control the following software applications running in the background 
on the NOP1840. 

Application 

Actions 

TelliNet Server 

•

  Stop TelliNet Server 

The following message is generated when the Server stopped running. 

Stop was successful 

•

 

Restart TelliNet Server

 or 

Start TelliNet

 Server.  

The following message is generated when server is running. 

TelliNet Server is running. Restart was successful.  

 

or

 

Start was successful.

 

•

 

Do not start at Boot

 / 

Start at Boot

 

The following message is generated.  

TelliNet Server start at boot is deactivated.

 

TelliNet Server start at boot is activated.

 

•

  When the TelliNet Server has started, it is possible to access the TelliNet 

Server Proxy Graphical User Interface. See below for more details. 

TelliShape Server 

•

  Stop TelliShape Server 

The following message is generated when the Server stopped running. 

Stop was successful 

•

 

Restart TelliShape Server

 or 

Start Tellishape

 Server.  

The following message is generated when server is running.  

Tellishape Server  is running. Restart was successful.  

 

or

 

Start was successful.

 

•

 

Do not start at Boot

 / 

Start at Boot

 

The following message is generated.  

TelliShape Server start at boot is deactivated.

 

TelliShape Server start at boot is activated.

 

 

 

•

  After a 

start

 or 

restart

 a log file is displayed; 

•

  Click the 

Refresh 

to readout the current status. 

 

 

 

 

Summary of Contents for NOP1840 PEP-Box

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands