How to Manage
User Manual for AZ110 Broadcast Satellite Modulator with ASI interface
version 3.2
44
SHAPING THE FUTURE SATELLITE OF COMMUNICATIONS
5.4
Management Using the Ethernet Interface
5.4.1
Cabling
Use a crossed network cable for a direct connection between the Ethernet port of
the modulator to the Ethernet port of a computer. In case connection to the
modulator is done via a hub or switch, straight network cables are used.
5.4.2
Settings
The Azimuth
Error! Unknown document property name.
platform is equipped
with a powerful and easy-to-use graphical user interface (GUI) that allows you to
remotely monitor and control your equipment through a web browser.
To use the web interface, adapt the TCP/IP properties of the computer and
manually set an IP address that is within the range of the device IP address. For
example: take IP address 10.0.0.2 on the computer and 10.0.0.1 on the device.
Make sure that no pop-up blockers or firewall are active!
To adapt the TCP/IP properties on a typical Windows computer:
Choose
Start
>
Connect To
>
Show all connections
;
Right-click
Local Area Connection
;
Click
Properties
;
Scroll down and click
Internet Protocol (TCP/IP)
;
Click
Properties
;
Choose
Use the following IP address
;
Enter the following data:
-
IP address
, for example: 10.0.0.2;
-
Subnet mask
, for example: 255.255.255.0.
