Setting up the antenna
Astra2Connect Point&Play
®
Setup Manual - page 36
Version 2.3 - January 2009
Rough pointing: horizontal (azimuth)
To start horizontal pointing:
1
Loosen the lock bolts (1) and (2) of the eccentric A (3).
2
Rotate the eccentric (3) with the hex key until the letters A on the eccentric and the masthead
point towards each other, as shown in the figure above.
3
Secure the lock bolts (1) and (2).
4
Loosen the bracket nuts (4).
You can now move the antenna horizontally. Set the antenna to the average azimuth for your
country as shown in the
Antenna Pointing Information
document. Use a compass if
required.
Attention
For correct functioning of the compass, do not use it closer than 1.5 meter from metal parts.
A
A
1
3
2
4
