ECOLINER™
ALWAYS wear safety goggles or protective eye-wear when operating the unit!
1700 Jasper St., Unit F, Aurora, CO 80011
T
800.624.6706
F
303.364.7796
•
Newstripe.com
EcoLiner™ Manual / 4483.0917
ASSEMBLY
1.
Remove packing from around parts box, pail
lid, chassis and set aside. Leave foam wraps
on handle braces at this time.
2.
Rotate the handles to their raised position, while
lifting up on the rear of the machine.
3.
Remove the foam wraps from the handle braces.
4.
Position the spray hose so that it is in front of the
handle.
5.
Insert one carriage bolt through the left hand
brace and handle from the outside. Use one
female star knob to secure the brace.
6.
Insert the second carriage bolt through the right-
hand brace and handle from the outside. (Pic 2)
7.
Place the retaining clip for the spray hose over
the bolt and secure with a female star knob.
8.
Insert support arm into receiver tube on right-
hand side of the chassis until it stops and secure
with one large star knob.
Required Items and Tools
18AH SLA, 12 volt motorcycle battery with dimensions of 6 7/8”l x 3 7/16”w x 6 1/8”h (Not Included)
1/2” Wrenches or adjustable crescent Wrenches (2 required)
Your EcoLiner™ box should include:
Chassis/Handle assembly with paint spray hose attached
Paint pail lid
Cloth/mesh strainer
Parts bag containing:
(2) female star knobs
(2) large star knobs
(2) carriage bolts
Spray head support arm
Spray nozzle assembly
Paint suction hose
Owner’s manual
Pic 1
Pic 2
#15 Large Star
Knobs
#6 Spray Head
support Arm
#18 Spray
Nozzle
Assembly
Cloth/Mesh
Strainer
#9 Dip Tube
Hose
#16 Female
Star Knobs
#10 Suction
Filter
