background image

NS-211KA

NS-211KA

FCC Certifications

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.  However, there is no
guarantee that interference will not occur in a particular
i n s t a l l a t i o n .  I f  t h i s  e q u i p m e n t  d o e s  c a u s e  h a r m f u l
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:

6

Reorient or relocate the receiving antenna.

6

Increase the separation between the equipment and
receiver.

6

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

6

Consult the dealer or an experienced radio/TV technician
for help.

6

Shielded interface cables must be used in order to comply
with emission limits.

6

You are cautioned that changes or modifications not
e x p r e s s l y  a p p r o v e d  b y  t h e  p a r t y  r e s p o n s i b l e  f o r
compliance could void your authority to operate the
equipment.

6

This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:  (1)
This device may not cause harmful interference, and (2)
This device must accept any interference received,
including interference that may cause undesired operation.

CE Mark Warning

This is a Class B product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.

VCCI  Warning

Limited Warranty

NEWSTAR provides this limited warranty for its product only
to the person or entity who originally purchased the product
from NEWSTAR or its authorized reseller or distributor.

Limited Hardware Warranty:

NEWSTAR warrants that the hardware portion of the
NEWSTAR products described below ( Hardware ) will be
free from material defects in workmanship and materials
from the date of original retail purchase of the Hardware, for
the period set forth below applicable to the product type (
Warranty Period ) if the Hardware is used and serviced in
accordance with applicable documentation; provided that a
completed Registration Card is returned to an Authorized
NEWSTAR Service Office within ninety (90) days after the
date of original retail purchase of the Hardware.  If a
c o m p l e t e d  R e g i s t r a t i o n  C a r d  i s  n o t  r e c e i v e d  b y  a n
authorized NEWSTAR Service Office within such ninety (90)
period, then the Warranty Period shall be ninety (90) days
from the date of purchase.

NEWSTAR's sole obligation shall be to repair or replace the
defective Hardware at no charge to the original owner. Such
repair or replacement will be rendered by NEWSTAR at an
Authorized NEWSTAR Service Office. The replacement
Hardware need not be new or of an identical make, model or
part; NEWSTAR may in its discretion may replace the
d e f e c t i v e  H a r d w a r e  ( o r  a n y  p a r t  t h e r e o f )  w i t h  a n y
r e c o n d i t i o n e d  p r o d u c t  t h a t  N E W S TA R  r e a s o n a b l y
determines is substantially equivalent (or superior) in all
material respects to the defective Hardware.The Warranty
Period shall extend for an additional ninety (90) days after
any repaired or replaced Hardware is delivered. If a material
defect is incapable of correction, or if NEWSTAR determines
in its sole discretion that it is not practical to repair or replace
the defective Hardware, the price paid by the original
purchaser for the defective Hardware will be refunded by

Product Type

Warranty Period

Product (excluding power supplies and fans)

Three (3) Years

Power Supplies and Fans

One (1) Year

Spare parts and spare kits

Ninety (90) days

Summary of Contents for NS-211KA











Reviews: