background image

 Introduction

Thank you for purchasing the NEWSTAR KVM Switch, this
product will ensure easy and accurate control over 2 PCs
through a single console. The

 is compatible with

15 pin HDDB style computers and comes with advanced
features. It has keyboard, mouse and video emulation for
error free boot-ups and support is also provided for the
Microsoft Intellimouse. The

 supports high

resolutions, resolutions up to 2048 x 1536 are supported
without any deterioration of the image quality. Switching
between PCs can be accomplished in two ways: through
keyboard Hot Key commands or by using the convenient
front-panel Select  pushbutton controls. No other KVM switch
lets you control 2 computers from a control consoles
simultaneously this conveniently.

Features

6

Allows a user to control 2 computers from one console.

6

Built-in microphone and speaker jacks.

6

Works with Windows 95/98/2000/ME/NT/XP, Free BSD.

6

No drivers or other additional software required.

6

Keyboard and mouse emulation allows error-free boot-up.

6

The status of  the (CAPS LOCK),( SCROLL LOCK) and
(NUM  LOCK) keys is stored for each of the computers.

6

Uses inexpensive and commonly available cables.

6

Supports Monitor resolutions of up to 2048 x 1536.

6

Supports VGA, SVGA and MultiSync monitors.

6

Select  Push-button or keyboard  Hot Key  control.

6

Comes with AutoScan mode for convenient automatic
switching.

6

Front panel status LEDs give a clear indication of the active
PC.

6

Audible feedback when switching between computers.

KVM Switch

KVM Switch

 Specifications

Physical Properties:
Width:

 85mm

Height:

35mm

Depth:                        110mm
Weight:

450g

Operation and Storage parameters:

Operating Temperature: 0~40 Degrees C

(32 to 104 Degrees F)

Storage Temperature:  -20~60 Degrees C

(-4~140 Degrees F)

Humidity: 0~80% RH non condensing

PC port connections

All in one HDDB 15 pin Female (Keyboard, Mouse, Monitor)
Audio  Input/Output (3.5 mm jack)
Microphone  Input/Output (3.5 mm jack)

Console connections

All in one HDDB 15 pin Female(Keyboard, Mouse, Monitor)
Audio  Input/Output (3.5 mm jack)
Microphone  Input/Output (3.5 mm jack)

1

2

NS-211KA

NS-211KA

Package Contents

Item

  QTY

NS-211KA

1 piece

User Manual

1 piece

KVM Cable

2 pieces

Cable Converter

1 piece

Remark

KVM Switch

Summary of Contents for NS-211KA











Reviews: